composite pipeline repair and reinforcement system

Product description:

REINFORCEKiT® 4D (R4D) is a wet application system, helicoidally wrapped around the tube to give mechanical strength to the damaged section of the tube. The number of layers determined by the calculations is associated not only with the pressure of the pipe, temperature, diameter and thickness, but also with the depth and length of the damage, the type of steel and the position of the tube. Repair design and material requirements are provided by 3X REA software after information is collected in accordance with ASME B31G, CSA Z662, ISO 24.817 and ASME PCC-2 standards and standards.

REINFORCEKiT® 4D is recommended for repair and reinforcement of pipelines operating at temperatures from -50°C to +150°C exposed to external/internal corrosion, stainlessness (special repair procedure on active pipeline), injection and mechanical damage. The system restores the integrity of the pipe and prevents further destruction. This composite sleeve is made of 400 g/m2 Kevlar® tape and highly reinforced ceramic epoxy resin.

  • internal and external corrosion
  • repair of corrosion rods
  • hole, leak, chewing
  • mechanical damage, clogging
  • strong abrasion, erosion
  • sabotage
  • restoring the integrity of the pipe
The main advantages of the application:
  • online repair (no exclusion is required except in case of leakage)
  • no losses in production and shipment
  • non-invasive repair in the process of transmission and production of current
  • long-term repair
Application in areas:
  • on land and sea (in air)
  • all pipe geometries, including spouts, pins and triplets
  • all tubes sizes (without limitation)
  • high pressure pipeline
  • pipes working from -50°C to 150°C
  • pipes transporting the most common fluids and gases

Question about REINFORCEKiT® 4D - composite pipeline repair and reinforcement system

For documentation, please fill in the form or contact us.

EN: Question about REINFORCEKiT® 4D - composite system for repair and reinforcement of pipes