Water & Wastewater

Optimal solutions for pressure transport of water and wastewater

The sewage systems are unique exposed to highly corrosive environments, so keeping them in good condition requires only solutions of the highest quality.

All products intended for the construction of new and renovation of old water supply and sewerage networks, as well as for technological and industrial installations you will find registered below.

Heat shrinkable sleeve systems

More about AGCOR Group

By type or application

Can't find a suitable product?

Do you not know which product is suitable?

INDUSTRY SECTORS

We provide services in the area of

Find out more

Water & Wastewater

Optimal solutions for pressure transport of water and wastewater

Cheray Polymer type HMS Composite 3C

heat shrinkable sleeve based on viscoelastic-mastic adhesive in class C - type 13B-3

Cheray Polymer type HMS Mastic

heat shrinkable sleeve based on mastic adhesive in class C - type 14A ㅤ

Cheray Polymer type HIS-50 ㅤ

heat shrinkable sleeve for low temperatures in class C - type 14A-1 ㅤ

EVOLEN OP-1 MONOTAPE

one-tape system without primer

SFPWrap™ B30 Tape System

one-tape system in B30 class

SFPWrap™ C50 Tape System

three-layer system in C50 class

SFPWrap™ MASTIC FILLER

profiling and filling mass

PREMTAPE™ A30 System

petrolatum cold tape coating

SFPC® POLY-LAM

composite reinforcement for anti-corrosion coating

SFPC® SOLIDE HT-EN

two-component polyurethane coating type 18B

SFPC® SOLIDE PP

PP-proofed with two-component polyurethane coating type 18E (PUPP)

SFPC® SOLIDE GRPU ㅤ

composite-polyurethane system for protection of field joint coatings

SFP Casing Filler FS™ㅤ

synthetic casing filler ㅤ

SFP Casing Spacer™ type MP-CB

non-metallic casing spacer DN200-DN1200

SFP Casing Spacer™ type MP-RAC-B

non-metallic casing spacer DN250-DN1700

SFPC® type RING BROM SUPPORT

insulating supports under the pipe for supporting the product pipe

Support saddles SFPC® type BROM-SUPPORT DSL

insulating supports under the pipe for supporting the product pipe

SFP Coatings® CES system ㅤ

casing end sealing system ㅤ

Casing End Seal type RQST Multi

sealed closure of ends of casing pipes - throughput up to DN1600

Elastomer Casing End Seal type ECES

tight closing of the ends of casing pipes ㅤ

Casing End Seal type STEP DU

closure of ends of casing pipes - permeable DN16-DN100

SFPWrap™ MASTIC FILLER

profiling and filling mass

HMAS PE Repair Stick

repair stick

CRP repair system

repair materials for PE and PP coatings

SFPC® SOLIDE Smart Kit ㅤ ㅤ

fast curing polyurethane coating for repairs and filling coating defect

Two component polyurethane coating type REPAIR 880

polyurethane coating for manual application and repairs

SFPWrap™ ALU-UV

aluminum UV resistant tapeㅤ

STEELCOAT™ SYSTEM

coatings for aboveground structures and pipelines

VISCOTAQ® VISCOWRAP

two-layer visco-elastic systemㅤ

EVOLEN OP-1 MONOTAPEㅤ

one-tape system without primerㅤ

SFPC® Transition REIN-MCU KIT

mechanical protection of ground-air transitions

Two component polyurethane coating type 870 EN FAST

polyurethane spray coating according to EN 10290 ㅤ

Two component polyurethane coating type 875 EN cartridge

cartridge system for polyurethane coatings according to EN 10290

Two component polyurethane coating type REPAIR 880

polyurethane coating for manual application and repairs

SFPC® SOLIDE Smart Kit ㅤ ㅤ

fast curing polyurethane coating for repairs and filling coating defect

EUROKOTE® 740/750 HT

heat shrinkable sleeve based on mastic adhesive in class C - type 14A
ㅤ

Cheray Polymer type HIS-50
ㅤ

heat shrinkable sleeve for low temperatures in class C - type 14A-1
ㅤ

SFPC® SOLIDE GRPU
ㅤ

SFP Casing Filler FS™
ㅤ

synthetic casing filler
ㅤ

SFP Coatings® CES system
ㅤ

casing end sealing system
ㅤ

tight closing of the ends of casing pipes
ㅤ

SFPC® SOLIDE Smart Kit
ㅤ
ㅤ

aluminum UV resistant tape
ㅤ

two-layer visco-elastic system
ㅤ

EVOLEN OP-1 MONOTAPE
ㅤ

one-tape system without primer
ㅤ

polyurethane spray coating according to EN 10290
ㅤ

SFPC® SOLIDE Smart Kit
ㅤ
ㅤ

FBE epoxy coating compliant with ISO 21809-1 and ISO 21809-2
ㅤ

fast-curing epoxy coating for application at low temperatures
ㅤ

VISCOTAQ® VISCOWRAP
ㅤ

VISCOTAQ® VISCOMASTIC
ㅤ

visco-elastic anticorrosion paste
ㅤ

STOPKiT®
ㅤ

petrolatum cold tape coating
ㅤ

systems for piles and marine structures
ㅤ

petrolatum cold tape coating
ㅤ

systems for piles and marine structures
ㅤ