SFP Casing Spacer™ type MP-CB non-metallic casing spacer DN200-DN1200 Product description: SFP Casing Spacers™ type MP-CB are designed to protect the product pipe during laying in a protective pipe and cathode-protected pipelines. The patented design guarantees the shortest possible installation time. Area of application – for pulling and storing pipes, for large medium pipes and […]

Casing End Seal type STEP DU closure of ends of casing pipes – permeable DN16-DN100 Product description: The 110/16 mm DU graduated closing sleeve can be applied versatile and can be gradually adjusted on the construction site to the right size for the product/casing pipe combination. One type that can be used alternately for cover […]

Elastomer Casing End Seal type ECES tight closing of the ends of casing pipes Product description: The ECES type closing sleeve is always supplied in the right size for the produkt pipe / casing pipe combination. Further adaptation on the construction site is no longer necessary. Main advantages: resistant to groundwater and other media possible […]

Casing End Seal type RQST Multi sealed closure of ends of casing pipes – throughput up to DN1600 Product description: The seamless seals of the ends of the RQST Multi casing pipe are manufactured according to special requirements. They are available for almost all tubes sizes. The sealing bracelet is a suitable type especially for […]

SFP Coatings® CES system casing end sealing system Product description: The SFP Coatings® CES (Casing End Closure) system is used to seal the ends of the casing pipe to prevent external factors from entering the interior of the protection pipe while reducing the corrosion conditions. The system is also used for the subsequent filling of […]

Support saddles SFPC® type BROM-SUPPORT DSL insulating supports under the pipe for supporting the product pipe Product description: Made of plastic insulating supports designed for supporting extremely long product pipes. The supports are adapted to the remote loops offered on the market and reliably prevent contact between the product pipe and the casing – even […]

SFPC® type RING BROM SUPPORT insulating supports under the pipe for supporting the product pipe Product description: SFPC® type RING BROM SUPPORT is made of composite insulating supports designed for ring support and free (bottom donation) of exceptionally long wire pipes. The supports are adapted to any transmission/distance bearings and reliably prevent contact between the […]

SFP Casing Spacer™ type MP-RAC-B non-metallic casing spacer DN250-DN1700 Product description: SFP Casing Spacers™ type MP-RAC-B are designed to protect the product pipe during laying in a protective pipe and cathode-protected pipelines. The patented design guarantees the shortest possible installation time. Area of application – for pulling and storing pipes, for large medium pipes and […]

SFPC® SOLIDE GRPU glass reinforced polyurethane system for protection of field joint coatings Product description: SFPC® SOLIDE GRPU (Glass Reinforced Polyurethane) is designed by AGCOR to protect welded joints from corrosion and mechanical protection. The system has been designed with two of the most efficient materials known in non-excavation methods such as HDD, Direct Pipe, […]

SFPC® SOLIDE PP (PUPP) PP-proofed with two-component polyurethane coating type 18E Product description: The SFP Coatings® SOLIDE PP system is the world’s most modern system developed by AGCOR GROUP, consisting of a coat permanently connected to the factory insulation of polypropylene (3LPP) or polyethylen (3LPE) and a two-component polyurethane coating for durable prevention of corrosion […]