Portacell portable reference electrode Cu/CuSO4 Product description: Copper/Copper Sulphate Half-fire is an accepted standard for measuring surface potential in ground installations and can be used with any high-resistance voltmeter commonly used in the field of cathode protection. Semiconductors can be supplied with cables according to customer specification.         Dimensions: PORTACELL 30 (223 […]

Polar 1500-2 Cu/CuSO4 fixed reference electrode with 10cm2 and 1cm2 coupon Product description: The use of polyethylene coating or similar types of high-dielectric coating on new pipelines requires the use of a polarization coupon to simulate coating leakage. Copper spiral wire with 500 cm2 of exposed surface inside saturated electrolyte ensures a constant read even […]

Polar 1500 Cu/CuSO4 fixed reference electrode with 10cm2 coupon Product description: The use of polyethylene coating or similar types of high-dielectric coating on new pipelines requires the use of a polarization coupon to simulate coating leakage. Copper spiral wire with 500 cm2 of exposed surface inside saturated electrolyte ensures a constant read even in difficult […]

Permacell 1100 Cu/CuSO4 fixed reference electrode Product description: The Permacell 1100 reference electrode, thanks to a specially made terracotta body, provides good porosity, which guarantees moisture absorption from the soil, while keeping the saturated copper sulfate solution inside the electrodes. Copper spiral wire with 500 cm2 of exposed surface inside saturated electrolyte ensures a constant […]

CMPOLAR® Cu/CuSO4 fixed reference electrode with two coupon Product description: CMPOLAR® is a tool for measuring cathode protection consisting of a fixed reference electrode (Cu/CuSO4) and polarization coupons. The electrode can be used to continuously measure the polarized potential of IR Free metal structure without disconnecting the system power supply. In addition, CMPOLAR® also provides […]

Anodes magnesium, titanium, silicon-iron Product description: Anode protection is one of the methods of protecting metals from electrochemical corrosion, consisting of combining all the elements of a protected structure into one closed electrical circuit in which the protected metal is an anode. Magnesium Anodes ELK ANODE Magnesium anodes are manufactured from standard potency alloy (AZ63) […]

MiniSwitch power switch Product description: The MiniSwitch power switch is a device designed to interact with the MiniTrans sensor, controlled by its power output, and powered by an internal 9V lithium battery, with more than 5 years of service life. Can work with a maximum power of 60V DC/10A. The front board of the MiniSwitch […]

MiniTakt counting and synchronization Product description: MiniTakt is a small battery-powered time switch with a quartz time base for short-term switching of protection systems and line sections during maintenance and potential testing sessions. Space-saving design and network-independent operation allow discreet installation in test points or concrete pillars. The device offers three optional switching cycles. The […]

MiniControl extension module for SOK and multiplier of measurement channels Product description: Optional, additional module for the cathode protection monitoring set for programming the MiniTrans and MiniTransPlus sensor and doubling the measurement channels. Control of the cathode protection station If the MT or MTP receives a command to control the cathode protection station, it transmits […]

30A MiniTrans POWER SUPPLY power relay 30A Product description: The power supply serves as a power supply for the MiniTrans sensor and as a switch in the remote monitoring system. Maximum switching power: on the primary side: 4A/230V AC on the secondary: max 30A/330V, typical 10A/440V DC. Question about 30A MiniTrans POWER SUPPLY – power […]