MiniControl extension module for SOK and multiplier of measurement channels Product description: Optional, additional module for the cathode protection monitoring set for programming the MiniTrans and MiniTransPlus sensor and doubling the measurement channels. Control of the cathode protection station If the MT or MTP receives a command to control the cathode protection station, it transmits […]

30A MiniTrans POWER SUPPLY power relay 30A Product description: The power supply serves as a power supply for the MiniTrans sensor and as a switch in the remote monitoring system. Maximum switching power: on the primary side: 4A/230V AC on the secondary: max 30A/330V, typical 10A/440V DC. Question about 30A MiniTrans POWER SUPPLY – power […]

Powerswitch LS100 power switch with electronic relay 100A Product description: The LS100 is designed for switching the aligners of the cathode protection station. Power switch with power supply or 9V battery (possible use of external power supply 6V to 12V). Easy to install without having to check the switch polarity because the LS100 switches the […]

DC-2000 Microvoltmeter high sensitivity constant voltage meter Product description: The DC2000 is a battery- and network-powered DC microvolt meter with high measurement sensitivity, with built-in active filters and an analog display. Measurement range and input resistance The microvolt meter is a very precise device with a moving coil, equipped with both batteries and a network […]

MiniLog2 device for control and DCVG intensive measurements Product description: MiniLog2 is a waterproof, versatile measuring instrument equipped with an LCD display and keyboard designed for cathode corrosion protection. As a recorder, MiniLog2 records data from two DC and AC channels, performing simultaneous constant and variable voltage measurements in each of them. Synchronized with GPS, […]

MiniTrans Plus remote monitoring and control for cathodic protection Product description: Remote control of cathode protection works economically when installed simultaneously in measurement sites and cathode protective devices, reducing the cost of regular inspections of measuring sites and protective equipment. The devices are used to monitor the parameters and control the work of the cathode […]

TYPE-CARE-M steel stubs insulation kit Product description: The set is used for insulation of steel cutters, for example, after a pipeline bubbling or flood cutters. The M watering kit is easy to process and no pre-grounding is required. The product is certified by the DVGW Institute, which confirms the certainty of insulation. The shape of […]

TYPE-CARE MINI DN32-DN50 cable connection insulation kit – pin brazing Product description: The kit is used to insulate the cable connections to the pipeline and to provide adequate cathode protection to the connections. The product is certified by the DVGW Institute, which confirms the certainty of insulation of the place, among other things, after the […]

TYPE-CARE cable connection insulation kit – pin brazing Product description: The kit is used to insulate the cable connections to the pipeline and to provide adequate cathode protection to the connections. The product is certified by the DVGW Institute, which confirms the certainty of insulation of the place, among other things, after the Pinbrazing method. […]